The new 966L Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets China Nonroad Stage III emission standards and U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards.
Engine
Net Power – ISO 9249 | 207.0 kW |
Engine Model | Cat C9.3 ACERT |
Displacement | 9.3 L |
Max Gross Power @ 1,700 rpm – ISO 14396 (metric) | 227.0 kW |
Max Net Power @ 1,700 rpm – ISO 9249 (metric) | 207.0 kW |
Peak Gross Torque (1,200 rpm) – ISO 14396 | 1581.0 N·m |
Maximum Net Torque (1,000 rpm) | 1507.0 N·m |
Sound
Note | *Distance of 15 m, moving forward in second gear ratio. |
With Cooling Fan Speed at 70% of Maximum Value:** Operator Sound Pressure Level (ISO 6396:2008) | 69.0 dB(A) |
With Cooling Fan Speed at 70% of Maximum Value:** Exterior Sound Power Level (ISO 6395:2008) | 108 LWA*** |
Note | **For machines in countries that adopt the “EU Directives.” |
With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008) | 72.0 dB(A) |
With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008) | 109.0 dB(A) |
With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013) | 76 dB(A)* |
Note | ***European Union Directive “2000/14/EC” as amended by “2005/88/EC.” |
Weights
Operating Weight | 23220.0 kg |
Note | Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.2 m3 general purpose bucket with BOCE. |
Buckets
Bucket Capacities | 3.20-7.40 m³ (4.19-9.68 yd3) |
Operating Specifications
Breakout Force | 173.0 kN |
Static Tipping Load – Full 37° Turn – with Tire Deflection | 14686.0 kg |
Static Tipping Load – Full 37° Turn – No Tire Deflection | 15822.0 kg |
Note | For a machine configuration as defined under “Weight.” |
Note | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Transmission
Forward 1 | 6.5 km/h |
Forward 2 | 13.1 km/h |
Forward 3 | 23.5 km/h |
Forward 4 | 39.5 km/h |
Reverse 1 | 7.1 km/h |
Reverse 2 | 14.4 km/h |
Reverse 3 | 25.9 km/h |
Reverse 4 | 39.5 km/h |
Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm roll radius. |
Hydraulic System
Implement Pump Type | Variable Displacement Piston |
Implement System: Maximum Pump Output (2,200 rpm) | 360.0 L/min |
Implement System: Maximum Operating Pressure | 31000.0 kPa |
Hydraulic Cycle Time – Total | 10.1 Seconds |
Service Refill Capacities
Cooling System | 71.6 L |
Crankcase | 24.5 L |
Transmission | 58.5 L |
Hydraulic Tank | 125.0 L |
Fuel Tank | 303.0 L |
Differentials and Final Drives – Front | 57.0 L |
Differentials and Final Drives – Rear | 57.0 L |
Dimensions – Standard Lift
Height to Top of Hood | 2818.0 mm |
Height to Top of Exhaust Pipe | 3522.0 mm |
Height to Top of ROPS | 3859.0 mm |
Ground Clearance | 434.0 mm |
Center Line of Rear Axle to Edge of Counterweight | 2251.0 mm |
Center Line of Rear Axle to Hitch | 1775.0 mm |
Wheelbase | 3550.0 mm |
Overall Length (without bucket) | 7362.0 mm |
Hinge Pin Height at Maximum Lift | 4235.0 mm |
Hinge Pin Height at Carry | 630.0 mm |
Lift Arm Clearance at Maximum Lift | 3643.0 mm |
Rack Back at Maximum Lift | 62 degrees |
Rack Back at Carry Height | 50 degrees |
Rack Back at Ground | 42 degrees |
Maximum Width over Tires | 3009.0 mm |
Tread Width | 2230.0 mm |
Note | All dimensions are approximate and based on L3 XHA2 tires. |
Dimensions – High Lift
Height to Top of Hood | 2818.0 mm |
Height to Top of Exhaust Pipe | 3522.0 mm |
Height to Top of ROPS | 3859.0 mm |
Ground Clearance | 434.0 mm |
Center Line of Rear Axle to Edge of Counterweight | 2500.0 mm |
Center Line of Rear Axle to Hitch | 1775.0 mm |
Wheelbase | 3550.0 mm |
Overall Length (without bucket) | 8111.0 mm |
Hinge Pin Height at Maximum Lift | 4793.0 mm |
Hinge Pin Height at Carry | 778.0 mm |
Lift Arm Clearance at Maximum Lift | 4140.0 mm |
Rack Back at Maximum Lift | 71 degrees |
Rack Back at Carry Height | 49 degrees |
Rack Back at Ground | 39 degrees |
Maximum Width over Tires | 3009.0 mm |
Tread Width | 2230.0 mm |
Note | All dimensions are approximate and based on L3 XHA2 tires. |
Bucket Capacities
Bucket Range | 3.20-7.40 m³ (4.19-9.68 yd3) |
Reliability
Durability
Productivity
*Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.
Fuel Efficiency
**Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.
Ease of Operation
Safety
Serviceability
Cat Connect Technology
Selection of right Construction Equipment for your Project