950L (2017) - UTE CAT

UTE Cat Wheel Loaders 950L (2017)

UTE Cat Wheel Loaders 950L (2017)

The new 950L Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets China Nonroad Stage III and India Bharat Stage III emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.


REQUEST QUOTE

DOWNLOAD MANUAL

  • SPECIFICATIONS
  • BENEFITS AND FEATURES

SPECIFICATIONS

Engine

Net Power – ISO 9249 185.0 kW
Engine Model Cat C7.1 ACERT
Displacement 7.01 L
Max Gross Power @ 2,000 rpm – ISO 14396 (metric) 195 kW (265 hp)
Max Net Power @ 2,000 rpm – ISO 9249 (metric) 185 kW (252 hp)
Peak Gross Torque (1,400 rpm) – ISO 14396 1050.0 N·m
Maximum Net Torque (1,400 rpm) 984.0 N·m

Weights

Operating Weight 18136.0 kg
Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, open/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 general purpose bucket with BOCE.

Buckets

Bucket Capacities 2.7-4.4 m³ (3.5-5.8 yd3)

Operating Specifications

Breakout Force 152.0 kN
Static Tipping Load – Full 40° Turn – No Tire Deflection 11624.0 kg
Static Tipping Load – Full 40° Turn – with Tire Deflection 10926.0 kg
Note For a machine configuration as defined under “Weight.”
Note Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Transmission

Forward 1 6.9 km/h
Forward 2 12.0 km/h
Forward 3 19.3 km/h
Forward 4 25.7 km/h
Reverse 1 6.9 km/h
Reverse 2 12.0 km/h
Reverse 3 25.7 km/h
Forward 5 39.5 km/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm roll radius.

Hydraulic System

Hydraulic Cycle Time – Total 9.5 Seconds
Implement Pump Type Variable Axial Piston
Implement System: Maximum Pump Output (2,340 rpm) 245.0 L/min
Implement System: Maximum Operating Pressure 27900.0 kPa

Service Refill Capacities

Cooling System 54.0 L
Crankcase 20.0 L
Transmission 43.0 L
Hydraulic Tank 125.0 L
Differentials and Final Drives – Front 43.0 L
Differentials and Final Drives – Rear 43.0 L
Fuel Tank 275.0 L

Sound

With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008) 72.0 dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008) 107.0 dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*
Note *Distance of 15 m, moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value:** Operator Sound Pressure Level (ISO 6396:2008) 69.0 dB(A)
With Cooling Fan Speed at 70% of Maximum Value:** Exterior Sound Power Level (ISO 6395:2008) 104 LWA***
Note **For machines in countries that adopt the “EU Directives.”
Note ***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”

Bucket Capacities

Bucket Range 2.7-4.4 m³ (3.5-5.8 yd3)

Dimensions – Standard Lift

Height to Top of Hood 2697.0 mm
Height to Top of Exhaust Pipe 3415.0 mm
Height to Top of ROPS 3446.0 mm
Ground Clearance 368.0 mm
Center Line of Rear Axle to Edge of Counterweight 2083.0 mm
Center Line of Rear Axle to Hitch 1675.0 mm
Wheelbase 3350.0 mm
Overall Length (without bucket) 6939.0 mm
Hinge Pin Height at Carry Height 663.0 mm
Hinge Pin Height at Maximum Lift 3995.0 mm
Lift Arm Clearance at Maximum Lift 3410.0 mm
Rack Back at Maximum Lift 60 degrees
Rack Back at Carry Height 49 degrees
Rack Back at Ground 41 degrees
Maximum Width over Tires (loaded) 2822.0 mm
Tread Width 2140.0 mm
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Dimensions – High Lift

Height to Top of Hood 2697.0 mm
Height to Top of Exhaust Pipe 3415.0 mm
Height to Top of ROPS 3446.0 mm
Ground Clearance 368.0 mm
Center Line of Rear Axle to Edge of Counterweight 2071.0 mm
Center Line of Rear Axle to Hitch 1675.0 mm
Wheelbase 3350.0 mm
Overall Length (without bucket) 7428.0 mm
Hinge Pin Height at Carry Height 765.0 mm
Hinge Pin Height at Maximum Lift 4490.0 mm
Lift Arm Clearance at Maximum Lift 3794.0 mm
Rack Back at Maximum Lift 66 degrees
Rack Back at Carry Height 54 degrees
Rack Back at Ground 45 degrees
Maximum Width over Tires (loaded) 2822.0 mm
Tread Width 2140.0 mm
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

 

BENEFITS AND FEATURES

Reliability

  • Cat® C7.1 ACERT™ engine offers a combination of proven electronic, fuel, and air systems.
  • Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.

Durability

  • Tough countershaft powershift transmission and axles handle extreme applications.
  • Improved hydraulic hose routing reduces potential hose wear.
  • Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.

Productivity

  • Engine power increased by approximately 22% improves machine performance and response (compared to H Series).
  • Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
  • High capacity torque converter results in greater digging efficiency.
  • Z-bar linkage provides high breakout force at ground level.
  • Optional high lift linkage offers increased hinge pin height to load more easily in a variety of applications.
  • Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
  • Optional fully automatic traction control system (differential locks) improves performance in the pile and poor underfoot conditions.

Fuel Efficiency

  • Up to 10% lower fuel consumption than H Series.*
  • Power dense ACERT engine burns less fuel by providing power and torque when needed.
  • Performance Series Buckets feature a longer floor that easily digs through the pile resulting in lower fuel consumption.
  • Load sensing hydraulics result in proportional flow for implement and steering on demand.
  • Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.

*Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

Ease of Operation

  • New best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
  • Intuitive, ergonomic controls keep operators focused on their work.
  • Optional new ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.

Safety

  • Excellent cab access with wide door and stair-like steps.
  • Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.
  • Robust, repositioned grab bars provide safe access to platforms.

Serviceability

  • One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
  • Safe ground level access to fuel fill, oil fill, filters and daily maintenance points means less servicing time required.
  • Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.

Cat Connect Technology

  • Monitor, manage and enhance job site operations.
  • Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
  • Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
  • Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.


Contact us


Mr. Janak Edirisinghe
General Manager
Machine Sales and Rental (GMMSR)

Tel: 0094 – 11 – 2938781
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77- 2725594

Mr. Duminda Perera
Manager – Machine Sales

Tel : 0094 – 11 – 2932109
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77- 2739176

Mr.Kasun Abhayrathne
Asst. Manager – Machine Sales

Tel: 0094 – 11 – 2932109
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77- 2726253


Mr.Champika Jayawardena
Manager – Rental Equipment

Tel: 0094 – 11 – 2932109
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77- 2440781

Mr. Ranil P. Meddepola
Manager-Power Systems

Tel: 0094 – 11 – 2932109
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77 – 3035418

UTE handed over the Biggest Excavator in Sri Lanka, the Cat 6020B to the Colombo Port City Project.