|Engine Model||Cat C2.2|
|Net Flywheel Power||35.0 kW|
|Gross Power SAE J1995||38.0 kW|
|Net Power SAE 1349/ISO 9249||35.0 kW|
|Operating Weight||2581.0 kg|
|Rated Operating Capacity||635.0 kg|
|Tipping Load||1270.0 kg|
|Breakout Force, Tilt Cylinder||1852.0 kg|
|Rated Operating Capacity with Optional Counterweight||680.0 kg|
|Length w/Bucket on Ground||3233.0 mm|
|Length w/o Bucket||2519.0 mm|
|Height to Top of Cab||1950.0 mm|
|Vehicle Width over Tires||1525.0 mm|
|Ground Clearance||195.0 mm|
|Maximum Dump Angle||40°|
|Maximum Overall Height||3709.0 mm|
|Bucket Pin Height at Maximum Lift||2854.0 mm|
|Bucket Pin Height at Carry Position||200.0 mm|
|Reach at Maximum Lift and Dump||505.0 mm|
|Clearance at Maximum Lift and Dump||2169.0 mm|
|Bumper Overhang Behind Rear Axle||967.0 mm|
|Turn Radius from Center – Machine Rear||1502.0 mm|
|Turn Radius from Center – Coupler||1195.0 mm|
|Turn Radius from Center – Bucket||1944.0 mm|
|Maimum Reach w/Arms Parallel to Ground||1291.0 mm|
|Rack Back Angle at Maximum Height||81°|
|Hydraulic Flow – Standard: Loader Hydraulic Pressure||23000.0 kPa|
|Hydraulic Flow – Standard: Loader Hydraulic Flow||61.0 L/min|
|Hydraulic Flow – Standard: Hydraulic Power (calculated)||23.2 kW|
|ROPS||SAE J1040 MAY94, ISO 3471:1994|
|FOPS||SAE J/ISO 3449 APR98 Level I, ISO 3449:1992 Level I|
|FOPS Level II||SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II (optional)|
|Travel Speed (Forward or Reverse)||12.7 km/h|
Service Refill Capacities
|Chain box, each side||6.0 L|
|Cooling System||10.0 L|
|Engine Crankcase||10.0 L|
|Fuel Tank||58.0 L|
|Hydraulic System||55.0 L|
|Hydraulic Tank||35.0 L|
Superior comfort to keep you productive throughout the work day.
All Day Comfort
Comfort and ease of operation have been designed into every aspect of the operator station. The wide, spacious interior and uncluttered floor provide a comfortable work environment with excellent head, shoulder and leg room to keep productivity high and fatigue low. The adjustable seat and low effort controls keep the operator comfortable throughout the work day.
Low Effort Joystick Controls
Ergonomic, pilot hydraulic controls deliver precise control with minimal effort. The right joystick controls the loader raise, lower and tilt functions while the left joystick controls the forward and reverse travel speed plus direction. Optional deluxe joysticks provide additional auxiliary controls with fingertip control of many work tool functions, including proportional work tool hydraulics and work tool electrical. Basic and deluxe joystick functions include one-touch continuous auxiliary hydraulic flow and momentary auxiliary hydraulic flow.
The wide cab opening offers an exceptional view to the work tool. The sloped angle of the engine compartment allows excellent visibility to the rear of the machine. The standard rear view mirror gives the operator a panoramic view of the machine’s rear and sides. The side windows remove easily for cleaning.
Additional Features for Maximum Comfort
The B-Series 3 machines offer the following additional features to help you on the job:
Exceptional lift, breakout and power to meet your needs.
High Performance Hydraulic System
Maximum power and reliability are built into the machine’s hydraulic system. In addition to providing power to the wheels, this system also provides the loader lift and tilt functions, powers the auxiliary circuit to drive work tools and drives the engine cooling fan. The hydraulic pumps are driven directly off the engine for maximum hydraulic performance and reliability – no belts are used. The hydraulic system also features:
High Efficiency Cooling System
Cooling capacity is maximized through the use of a side-by-side cooling package and hydraulically driven cooling fan.
Aggressive performance with fuel efficiency.
The high performance power train provides high engine horsepower and torque. The B-Series 3 machines feature rugged, reliable Cat engines that meet U.S. EPA Tier 4 Interim and EU Stage IIIA emissions requirements.
Hand and Foot Throttles
Hand and foot throttles allow the operator to match engine speed to the task. The hand throttle is ideal for jobs requiring constant engine speed such as cold planing, trenching or snow blowing. The foot throttle lets the operator vary engine speed and minimize fuel consumption for other tasks such as load and carry, truck loading, grading and dozing.
The anti-stall system maximizes machine power at all times by matching the engine torque with the operational requirements of the hystat and implement systems. This load sensing feature prevents the engine from stalling even during part throttle operation, keeping productivity high and fuel consumption low.
Built for tough jobs.
The 216B Series 3, with its radial lift design, delivers excellent digging performance with superior mid-lift reach.
Do more jobs with one machine with Cat Work Tools.
The Right Tool for the Job
Get the most out of your machine with the comprehensive line of Cat Work Tools. Designed and built for optimum performance and durability, these tools deliver high productivity in a variety of applications to maximize the versatility and flexibility of the Cat Skid Steer Loader:
Work tools can be changed quickly and easily with the machine’s quick coupler system. The standard quick coupler features manual engagement and disengagement of work tools using two high leverage handles. The optional hydraulic quick coupler allows the operator to quickly change tools without leaving the cab.
Simplified service and maintenance save you time and money.
Convenient service features make maintenance easy, reducing your downtime:
Support you can count on.
Superior Dealer Services
Your Cat dealer is ready to assist you with your purchase decision and everything after.
216B Series 3 Standard Equipment
216B Series 3 Optional Equipment
Counterweight, increases rated operating capacity 45 kg (100 lb)
Engine Block Heater – 120V or 240V
Oil, Hydraulic, Cold Operation
Heavy Duty Battery, 880 CCA