120K2 – UTE CAT MOTOR GRADERS

Engine

Base Power (1st gear) – Net	108.0 kW
Engine Model	Cat® C7 ACERT™
Bore	110.0 mm
Derating altitude	2286.0 m
Displacement	7.2 L
Fan Speed Maximum	1,575 rpm
Gross Power – ISO 14396	116.0 kW
High Ambient Capability	50.0 ° C
Maximum Torque Net	774.0 N·m
Number of cylinders	6
Power – All Gears: 1-8 Gross	118.0 kW
Power – All Gears: 1-8 Gross (metric)	118.0 kW
Power – All Gears: 1-8 Net	108.0 kW
Power – All Gears: 1-8 Net (metric)	108.0 kW
Speed @ rated power	2,000 rpm
Stroke	127.0 mm
Torque Rise	50%

Power Train

Brakes – Parking	Air actuated, multiple oil-disc
Brakes – Secondary	Dual Circuit
Brakes – Service	Air actuated, multiple oil-disc
Brakes – Service, surface area	18606.0 cm2
Forward/Reverse Gears	8 forward/6 reverse
Transmission	Direct drive, Powershift

Operating Specifications

Articulation Angle – left/right	20 Degrees
Forward – 1st	4.1 km/h
Forward – 2nd	5.5 km/h
Forward – 3rd	8.0 km/h
Forward – 4th	11.1 km/h
Forward – 5th	17.5 km/h
Forward – 6th	23.7 km/h
Forward – 7th	32.7 km/h
Forward – 8th	47.5 km/h
Reverse – 1st	3.2 km/h
Reverse – 2nd	6.0 km/h
Reverse – 3rd	8.7 km/h
Reverse – 4th	13.8 km/h
Reverse – 5th	25.8 km/h
Reverse – 6th	37.5 km/h
Steering Range – left/right	47.5 Degrees
Top Speed – forward	47.5 km/h
Top Speed – reverse	37.5 km/h
Turning Radius, outside front tires	7.3 m

Hydraulic System

Circuit Type	Load Sensing, Closed Center, PPPC
Maximum System Pressure	25500.0 kPa
Optional High Output Pump	210.5 L/min
Pump Output Standard Pump	159.1 L/min
Pump Type	Variable Piston
Reservoir Tank Capacity	24.5 L
Standby Pressure	3600.0 kPa

Moldboard

Blade Width	3.7 m
Arc Radius	413.0 mm
Blade Pull – base GVW	8112.0 kg
Blade Pull – maximum GVW	10623.0 kg
Cutting Edge – thickness	16.0 mm
Cutting Edge – width	152.0 mm
Down Pressure – base GVW	5594.0 kg
Down Pressure – maximum GVW	9317.0 kg
End Bit – thickness	16.0 mm
End Bit – width	152.0 mm
Moldboard – height	610.0 mm
Moldboard – thickness	22.0 mm
Throat Clearance	58.0 mm

Blade Range

Blade Tip Range – backward	5 Degrees
Blade Tip Range – forward	40 Degrees
Circle Centershift – left	658.0 mm
Circle Centershift – right	656.0 mm
Maximum Blade Position Angle	90 Degrees
Maximum depth of cut	775.0 mm
Maximum lift above ground	410.0 mm
Maximum shoulder reach outside of tires – left	1764.0 mm
Maximum shoulder reach outside of tires – right	1928.0 mm
Moldboard Sideshift – left	512.0 mm
Moldboard Sideshift – right	663.0 mm

Ripper

Machine length increase, beam raised	1058.0 mm
Penetration force	4083.0 kg
Pryout force	2108.0 kg
Ripper shank holder spacing	533.0 mm
Ripper shank holders, quantity	5
Ripping depth – maximum	262.0 mm

Scarifier

Mid, V-Type – Scarifier shank holder spacing	116.0 mm
Mid, V-Type – Scarifier shank holders quantity	11
Mid, V-Type – Scarifying depth, maximum	229.0 mm
Mid, V-Type – Working width	1184.0 mm

Frame

Circle – blade beam thickness	30.0 mm
Circle – diameter	1530.0 mm
Drawbar – height	127.0 mm
Drawbar – width	76.2 mm
Front axle – height to center	615.0 mm
Front axle – total oscillation per side	32 Degrees
Front axle – wheel lean, left/right	18 Degrees
Front-linear weights – maximum	172.0 kg/m
Front-linear weights – minimum	134.0 kg/m
Front-section modulus – maximum	3681.0 cm3
Front-section modulus – minimum	1619.0 cm3
Front-side plates – thickness	10.0 mm
Front-side plates – width	236.0 mm
Front-top/bottom plate – thickness	22.0 mm
Front-top/bottom plate – width	280.0 mm

Tandems

Drive chain pitch	44.5 mm
Height	438.0 mm
Sidewall thickness – inner	1.0 mm
Sidewall thickness – outer	16.0 mm
Tandem oscillation – front down	25 Degrees
Tandem oscillation – front up	15 Degrees
Wheel axle spacing	1510.0 mm
Width	172.0 mm

Service Refill

Circle drive housing	7.0 L
Cooling system	40.0 L
Engine Oil	18.0 L
Front wheel spindle bearing housing	0.5 L
Fuel Capacity	305.0 L
Tandem housing (each)	49.0 L
Transmission/Differential/Final Drives	48.0 L

Weights

Gross Vehicle Weight – Typically Equipped	13843.0 kg
Gross Vehicle Weight – Maximum	17000.0 kg
Gross Vehicle Weight, Base – front axle	3120.0 kg
Gross Vehicle Weight, Base – rear axle	9013.0 kg
Gross Vehicle Weight, Base – total	12133.0 kg
Gross Vehicle Weight, Maximum – front axle	5197.0 kg
Gross Vehicle Weight, Maximum – rear axle	11803.0 kg
Gross Vehicle Weight, Maximum – total	17000.0 kg
Gross Vehicle Weight, Typically Equipped – front axle	3970.0 kg
Gross Vehicle Weight, Typically Equipped – rear axle	9873.0 kg
Gross Vehicle Weight, Typically Equipped – total	13843.0 kg

Standards

Brakes	ISO 3450:1996
ROPS/FOPS	ISO 3471:1994/ISO 3449:2005
Sound	ISO 6394:2008, ISO 6396:2008
Steering	ISO 5010:2007

Dimensions (Approximate)

Ground Clearance – Center Front Axle	602.0 mm
Ground Clearance, Trans. Case	341.0 mm
Height to Exhaust Stack	2865.0 mm
Height – Non-ROPS Cab	3321.0 mm
Height – ROPS Cab	3326.0 mm
Height – ROPS Canopy	3326.0 mm
Height – Top of Cylinders	2885.0 mm
Length – Between Tandem Axles	1510.0 mm
Length – Counterweight to Ripper	9769.0 mm
Length – Front Axle to Mid Tandem	5870.0 mm
Length – Front Axle to Moldboard	2598.0 mm
Length – Front Tire to Rear of Machine	8265.0 mm
Width – Outside Front Tires	2449.0 mm
Width – Outside Rear Tires	2439.0 mm
Width – Tire Center Lines	2056.0 mm

Power Train

Reliable performance

Smooth Shifting Transmission

• Full Electronic Clutch Pressure Control ensures smooth shifting and directional changes.
• Shift Torque Management helps to smooth gear changes without the use of the inching pedal, helping the operator to remain focused on the task at hand.
• Load Compensation ensures consistent shift quality regardless of blade or machine load.
• Optional Autoshift automatically shifts the transmission at optimal points for easier operation.

Oil Disc Brakes – Completely Sealed, Adjustment Free

Oil-bathed, air actuated and spring-released, located at each tandem wheel to eliminate power train braking loads and to reduce service time. The large brake surface area provides dependable braking capability and extended life before rebuild.

Front Axle with Cat Live Spindle Design

Cat sealed spindle keeps the bearings free from contaminants and lubricated in a lightweight oil to reduce owning and operating costs. A larger tapered roller bearing is outboard where the load is greater, extending bearing life.

Cat C7 Engine

Maximum power and efficiency

Power Management

The Cat C7 engine with ACERT Technology uses electronic control, precision fuel delivery and refined air management to provide outstanding performance and lower emissions. The Electronic Throttle Control provides easier, more precise and consistent throttle operation. Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.

Hydraulics

Balanced hydraulics deliver consistent, precise and responsive control

Balanced Flow, Independent Oil Supply

Hydraulic flow is proportioned to ensure all implements operate simultaneously. Independent oil supply prevents cross-contamination and provides proper oil cooling, which means less heat build-up and extended component life.

Implement Control Valves

Provide outstanding operator “feel” and predictable system response for unmatched implement control. To help maintain exact blade settings, lock valves are built into all control valves. Line relief valves are also incorporated into selected control valves to protect the cylinders from over pressurization.

Load-Sensing Hydraulics

A load sensing variable displacement pump and advanced hydraulic valves provide superior implement control and better machine performance. Continuously matching hydraulic flow and pressure to power demands creates less heat and reduces power consumption.

Consistent and Predictable Movement

The hydraulic system valves are specifically designed for each hydraulic function on the motor grader. They compensate for differences in flow requirements, based on cylinder size and the difference in surface volume between the rod end (blue) and barrel end (red) of the cylinder. The result is predictable, consistent hydraulic speeds whether extending or retracting the cylinder.

Structures/Drawbar-Circle-Moldboard

Designed for strength and durability

Frame Structure – Provides Consistency and Strength

Front frame is a continuous top and bottom plate construction. Flanged box section design removes welds from high stress areas, improving reliability and durability. The rear frame structure has two box section channels with fully welded differential case for a solid working platform. An integrated bumper ties the rear frame together into a cohesive unit to handle high stress loads.

Drawbar, Circle and Moldboard

The K Series 2 drawbar is designed for high strength and optimum durability for any application. The circle stands up to high stress loads. Raised wear surfaces prevent circle teeth wear against the drawbar. The 64 uniformly spaced circle teeth are flame cut and heat induction hardened to resist wear, and the circle is secured to the drawbar by four support shoes for maximum support. The moldboard provides optimal curvature and large throat clearance that helps move all soil types quickly and efficiently. These features deliver excellent load distribution and minimal material buildup in the circle area while allowing large blade loads to roll freely.

Blade Lift Accumulators

This optional feature uses accumulators to help absorb impact loads to the moldboard by allowing vertical blade travel. Blade lift accumulators reduce unnecessary wear and help to avoid unintended machine movement for increased operator safety.

Work Tools and Attachments

Allows expansion of machine versatility, utilization, and performance

Moldboard Options

Standard moldboard length is 3.7 m (12 ft). Moldboard extensions are available to increase moldboard surface area and extend reach capability.

Ground Engaging Tools

A wide variety of cutting edges and end bits are available, all designed for maximum service life and productivity.

Rear Ripper/Scarifier

The optional ripper/scarifier is made to penetrate tough material fast and rip thoroughly for easier material movement with the moldboard. The ripper includes three shanks with the ability to add two more if needed.

Front Mounted Groups

A front mounted push plate/counterweight or front blade can be ordered.

Mid-Mount Scarifier

Positioned between the front axle and the circle to break up tough material that the blade can then move, all in a single pass. The V-type scarifier can accommodate up to 11 teeth.

Snow Removal Work Tools

Includes snow wings, angle blades, and V-plows. Multiple mounting options are available, increasing machine versatility. (Availability may differ by region.)

Operator Station

Caterpillar sets the standard for comfort, convenience and visibility

Designed for Productivity

K Series 2 cabs are designed to keep operators comfortable, relaxed and productive. Features like low effort pedals and controls, adjustable implement controls and adjustable steering wheel angle help make work easier on the operator. A clear view to the moldboard heel and tandem tires enhance productivity and safe operation. Rocker switches and transmission shifter are backlit for night time operation.

In-dash Instrument Cluster

The instrument panel, with easy-to read, high-visibility gauges and warning lamps, places vital machine information and diagnostic capability in easy view of the operator. The dash includes an engine coolant temperature gauge, an articulation gauge, voltage gauge and fuel level gauge. Service brake air pressure gauges are also standard. Speedometer and tachometer are optional. All major systems are monitored by warning lights.

Additional Cab Features

Additional cab features include storage area, an adjustable control console and coat hook. Optional offerings include power port, air conditioner/heater, suspension seat, defroster fan, sun shade, backup lights, Product Link™ ready, and AccuGrade™ System ready. NOTE: Some attachments are not available in all regions.

Integrated Technologies

Solutions to make work easier and more efficient

Cat AccuGrade

AccuGrade uses positioning and guidance technologies, machine sensors, and automatic blade control to help operators get to grade faster, easier and more efficiently. Digital design plans, real-time cut/fill data, and in-cab guidance give operators detailed information to work more confidently and achieve greater accuracy, in fewer passes, using less material. Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, making the work site safe, efficient, and cost effective. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).

AccuGrade Attachment Ready Option (ARO)

K Series 2 machines can be equipped with the AccuGrade ARO. It can be ordered as a factory or dealer installed option. The attachment option includes built-in mounting points and internal wiring, making installation of the AccuGrade grade control system faster and easier.

Cat Product Link*

Product Link helps take the guesswork out of equipment management with remote monitoring capabilities for your machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink® user interface. Knowing where your equipment is, what it’s doing and how it’s performing enables you or your Cat dealer to manage your fleet in real-time so you can maximize efficiency, improve productivity, and lower operating costs. *Product Link licensing not available in all areas. Please consult your Cat dealer for availability.

Complete Customer Support

When uptime counts

Renowned Cat Dealer Support

From helping you choose the right machine to financing and ongoing support, your Cat dealer provides the best in sales and service. Manage your costs with preventive maintenance programs like S•O•SSM fluids analysis, coolant sampling and guaranteed maintenance contracts. Stay productive with best-in-class parts availability. Your Cat dealer can help you boost your profits with operator training. And when it’s time for component replacement, your Cat dealer can help you save even more. Genuine Cat Remanufactured parts carry the same warranty and reliability as new products at savings of 40 to 70 percent for power train and hydraulic components

Sustainability

Thinking generations ahead

Convenient service points make routine maintenance quick and easy

Grouped Service Points on the left side to help ensure proper maintenance

Easy access to service areas speeds up maintenance and ensures that routine service is performed on time. Ecology drains shorten service times and help prevent spills. Radiator cleanout access gives the operator the ability to clear away debris and other materials that build up around the radiator.

Extended Service Intervals Reduce Downtime, Operating Cost

• 500 hour engine oil changes
• 4,000 hour hydraulic oil changes
• 12,000 hour engine coolant changes

Diagnostics and Machine Monitoring

The dash cluster panel provides enhanced machine information and diagnostic capability, which allows faster servicing of the transmission and engine.

O-Ring Face Seals

O-Ring face seals create a reliable connection and are used in all hydraulic circuits to minimize the possibility of oil leaks.

Separate Wiring Harnesses

Modular harness design provides simple disconnects for major machine repairs or rebuilds which reduces machine downtime.

Cat Electronic Technician

Cat Electronic Technician is a two-way communication tool that gives service technicians easy access to stored diagnostic data, reducing machine downtime and lowering operating costs.

120K2 Standard Equipment

ELECTRICAL

• Alternator, 115 Ampere
• Backup alarm, reversing lights
• Batteries, maintenance free 750 CCA
• Electrical system, 24 volt
• Horn, electric
• Lights, stop and tail
• Motor, starting
• Product Link Ready
• Working lights

OPERATOR ENVIRONMENT

• Accelerator
• Control console, adjustable
• Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)
• Guard rails, operator station
• Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)
• Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)
• Key start/stop switch
• Meter, hour
• Power steering, hydraulic
• Seat, vinyl-covered static
• Seat belt
• Steering wheel, tilt, adjustable
• Storage area, cooler/lunch box
• Throttle, electronic control

POWER TRAIN

• Air cleaner, dry type radial seal with service indicator and automatic dust ejector
• Air to air after cooler (ATAAC)
• Blower fan
• Brakes, oil disc, four-wheel air actuated
• Differential with lock/unlock
• Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control. Certified to Bharat Stage III and China Stage II emissions standards.
• Fuel water separator
• Muffler, under hood
• Parking brake, multi-disc, sealed and oil cooled
• Prescreener
• Priming pump, fuel, resiliently mounted
• Sediment drain, fuel tank
• Tandem drive
• Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

OTHER STANDARD EQUIPMENT

• Bumper, rear
• CD ROM Parts Book
• Circle drive slip clutch
• Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel
• Doors, Engine compartment
• Drawbar, 4 shoe replaceable nylon composite wear strips
• Endbits, 16 mm (5/8 in) DH-2 steel
• Frame, articulated with safety lock
• Fuel tank, 305 L (80.6 gal)
• Ground level engine shutdown
• Link bar, 7 position
• Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and mechanical tip
• S·O·S ports, engine, hydraulic, transmission and cooling
• Toolbox with padlock
• Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

ANTIFREEZE

• Extended Life Coolant to -35° C (-30° F)

120K2 Optional Equipment

GUARDS

• Guard, transmission

OPERATOR ENVIRONMENT

• Air conditioner with heater
• Heater, cab

CAB/CANOPY

• Cab, ROPS*
• Cab, Non-ROPS*
• Canopy, ROPS*
• Seat, vinyl adjustable
• Seat, cloth, contour
• Fan, defroster, front window
• Fan, defroster, rear window
• Sun shade, rear
• Wiper/washer, rear
• Wipers, intermittent front
• Mirrors, dual inside
• Mirrors, outside mounted
• Power port, 12V accessory
• Radio ready entertainment
• Tachometer/Speedometer
• * Weights represent changes to Typically Equipped machine weights.

POWER TRAIN

• Autoshift

OTHER ATTACHMENTS

• Product Link
• Snow Wing Mounting, frame-ready
• AccuGrade ARO
• Dryer, air
• Push plate, counterweight*
• Accumulator, blade lift
• Battery, extreme duty (1400 CCA)
• Ether, starting aid
• Heater, engine coolant, 220V
• * Weights represent changes to Typically Equipped machine weights.

HYDRAULICS

• Pump, hydraulic, high capacity (210 L/min 55.7 gal/min)
• Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing.

BLADES, MOLDBOARDS

• Moldboard, Deluxe: Blade, 3658 mm × 610 mm × 22 mm (12′ × 24″ × 7/8″) with hydraulic side shift and tip and 5/8″ end bits cutting edge 203 mm × 19 mm (8″ × 3/4″)
• Endbits, overlay, reversible pair for use with 203 mm (8″) cutting edges