CB54B - UTE CAT

UTE Cat Compactors CB54B

UTE Cat Compactors CB54B

The Cat® CB54B is a 10 ton roller with 1700 mm (67″) tandem vibratory drums. It excels on a variety of asphalt mix designs as well as other granular materials.


REQUEST QUOTE

DOWNLOAD MANUAL

  • SPECIFICATIONS
  • BENEFITS AND FEATURES
  • EQUIPMENT

SPECIFICATIONS

Weights

Operating Weight 9550.0 kg
Operating Weight at Rear Drum with ROPS/FOPS 4790.0 kg
Operating Weight at Front Drum with ROPS/FOPS 4760.0 kg
Operating Weight with cab 9725.0 kg
Maximum Weight at Front Drum 4790.0 kg
Maximum Weight at Rear Drum 4760.0 kg
Operating Weight with ROPS/FOPS 9550.0 kg

Operating Specifications

Standard Compaction Width 1700.0 mm
Curb Clearance 934.0 mm
Turning Radius Inside Drum Edge 4378.0 mm
Ground Clearance 268.0 mm
Maximum Compaction Width 1870.0 mm
Static Linear Load 29.2 kg/cm
Travel Speed – Maximum 12.0 km/h

Engine

Gross Power 96.5 kW
Bore 105.0 mm
Stroke 127.0 mm
Engine Model Cat® C4.4 with ACERT Technology

Dimensions

Overall Length 4565.0 mm
Wheelbase 3300.0 mm
Height with ROPS/FOPS 2982.0 mm
Compaction Width 1700.0 mm
Overall Width 1872.0 mm
Drum Width 1700.0 mm

Vibratory System

Drum Width 1700.0 mm
Drum Diameter 1198.0 mm
Frequency 45.0 Hz
Vibration Selection Independent per drum, front only, rear only, both
Eccentric Weight Drive Hydraulic direct, auto reversing
Centrifugal Force per Drum – Maximum 107.0 kN
Centrifugal Force per Drum – Minimum 34.6 kN
Nominal Amplitude – High 1.06 mm
Nominal Amplitude – Low 0.33 mm

Service Refill Capacities

Fuel Tank Capacity 208.0 L
Water (Spray) Tank Capacity 837.0 L

 

BENEFITS AND FEATURES

Exceptional Visibility and Control

The B-Series Tandem Vibratory Rollers offer unobstructed sight lines with standard 180° seat positioning for excellent all-around visibility. Also, drum edge and drum surface lighting provide better lighting for nighttime operation. The innovative handwheel steering technology eliminates the front console that is commonly found on other machines for precise machine control.

Comfortable Operating Station

The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle that supports communication devices, wide-width seat belt, cup holders and a lockable storage compartment.

Fingertip Control

The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.

LCD Display

The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.

Convenient Console

The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.

 

Vibratory System Choices

Cat Tandem Vibratory Rollers quickly reach target densities due to their versatile frequency and amplitude selections. These powerful rollers also provide finesse when necessary due to their flexible front or rear drum only vibratory capability. Options include dual amplitude/dual frequency, Versa Vibe™, and five amplitude systems.

Drum Design

These models offer multiple vibratory systems to match amplitude and frequency requirements. They perform particularly well in high-production applications. They provide high amplitudes for breakdown and intermediate work, while their high static linear loads deliver excellent results for finishing work.

Performance Features

The vibratory systems offer multiple options that help fine-tune performance on thick challenging lifts. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.

Five Amplitude Vibratory System

The five amplitude system is a heavy hitter for thick lifts and tough mix designs. It utilizes a single frequency and five amplitudes that can easily be fine-tuned to match application requirements.

Dual Amplitude/Dual Frequency Vibratory System

The dual amplitude, dual frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.

Versa Vibe™ Vibratory System

The Versa Vibe™ System creates two machines in one by providing two settings for lighter hitting and higher working speeds on thin lifts and two settings for heavier hitting, and slower speeds, on thick lifts. The four amplitudes, two frequencies can be easily adjusted for breakdown, intermediate, and finish capabilities.

 

Cat® Compaction Control

The optional Cat Compaction Control helps contractors increase efficiency and productivity while recording data for quality control documentation and future planning.

Temperature Sensors

Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

Pass-Count Mapping

Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

Temperature Mapping

Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

 

Smooth Operating Powertrain

The B-Series tandem rollers are powered by Cat® engines with ACERT™ Technology. The engine includes a variety of features that help reduce fuel burn, including Eco-mode, yet still deliver the power required on challenging jobsites. Tough components help extend compactor life.

Cat® C4.4 Engine

The C4.4 engine provides 96.5 kW (131.2 hp) of power and meets U.S. EPA Tier 3 and EU Stage IIIA emission standards. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service (a Cat exclusive).

High Capacity Cooling System

The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. The system directs warm air away from the operator for a more comfortable operating environment.

EQUIPMENT

CB54B Optional Equipment

5-Amplitude Vibratory System

Versa Vibe™ Vibratory System

Cat® Compaction Control

Edge Cutter

ROPS/FOPS Cab

Offset Hitch

Water Distribution Mats

Cocoa Mats

Water Spray Freeze Protection Kit

High Intensity Discharge Lights

Warning Beacon

External Mirrors

Bio-Degradeable Oil

Product Link

Drum Edge Lighting Package

High Ambient Cooling System

Air Suspension Seat w/heat

 


Contact us


Mr. Janak Edirisinghe
General Manager
Machine Sales and Rental (GMMSR)

Tel: 0094 – 11 – 2938781
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77- 2725594

Mr. Duminda Perera
Manager – Machine Sales

Tel : 0094 – 11 – 2932109
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77- 2739176

Mr.Kasun Abhayrathne
Asst. Manager – Machine Sales

Tel: 0094 – 11 – 2932109
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77- 2726253


Mr.Champika Jayawardena
Manager – Rental Equipment

Tel: 0094 – 11 – 2932109
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77- 2440781

Mr. Ranil P. Meddepola
Manager-Power Systems

Tel: 0094 – 11 – 2932109
Fax: 0094 – 11 – 2931550
Mobile: 0094 – 77 – 3035418

UTE handed over the Biggest Excavator in Sri Lanka, the Cat 6020B to the Colombo Port City Project.